MaxiIM IM508
MaxiIM IM508 is a fast, easy-to-use, and ultraportable immobilizer and key programming device. The Android-based touchscreen tablet features powerful quad-core processor, intuitive design and straight-forward interface. Equipped with the XP200 key programmer, IM508 is capable of providing extraordinary service functions for the immobilizer system. Together with the ability to quickly diagnose all modules of the majority of the makes and models on the market, IM508 provides you with superior special functions. IM508 is the perfect solution for shops and technicians who demand affordable and powerful IMMO and diagnostic services.
- Powerful Cortex-A9 processor
- 7” 1024×600 LCD capacitive touchscreen
- Internal reliable 32GB Memory
- Android Operating System for fast boot-up and multitasking
- Powerful combination of key programming/all system diagnostics/advanced maintenance services
- Smart Mode for guided and automated key learning
- Expert Mode for advanced key learning
- Read PIN/CS (all key lost) , key generation, key learning, remote learning
- IMMO ECU reset/adaptation, refresh/coding
- Transpronder read/write, EEPROM/MCU read/write
- Powerful OE level diagnostics for more than 80 US, Asian and European makes and models
- Advanced maintenance services including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn
Operating System | Android™ 4.4.4 |
Processor | Cortex-A9 processor (1.6 GHz) |
Memory | 32GB |
Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
Connectivity | Mini USB 2.0 USB 2.0 Wi-Fi Micro SD card (supports up to 32GB) |
Sensors | Ambient light sensor for brightness auto changing |
Audio Input / Output | Input: N/A Output: buzzer |
Power and Battery | 3.7 V/5000 mAh lithium-polymer battery, Charges via 5 VDC power supply |
Tested Battery Life | Around 4.5 hours of continuous use |
Power Consumption | 500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V |
Battery Charging Input | 5 V/1.5 A |
Operating Temp. | 0 to 50°C (32 to 122°F) |
Storage Temperature | -20 to 60°C (-4 to 140°F) |
Operating Humidity | 5% - 95% non-condensing |
Net Weight | 788 g (2.42 lb.) |
Supported Automotive Protocols | ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
- AAC001 – MED17 Cable
- KIA-20 Adaptor
- Mazda-17 Adaptor
- MaxiIM IM508 Tablet
- Carrying Case
- Quick guide
- Honda-3 Adaptor
- KIA-10 Adaptor
- XP200 Key Programmer
- USB External Power Adapter
- Main cable
- Mini USB Cable

GBox-2
– Faster password calculation for Benz All Key Lost
– 8X times faster password calculation for W172, W204, W207
– 4X times faster password calculation for W209, W211
– No more repeated insertions and removals of IR simulator for 10 types of EIS
– Passport reading for 9 type EIS when all keys lost on vehicle
– BMW DME/DDE ISN reading for 20 types (EDC17, MEVD17, MSV90, MSD87, etc)
– VAG ECM immo data reading & data synchronization for 18 types (MQB EDC17, MED17, etc)
– XP400 may be required for certain functions
– Support Mercedes All Key Lost BMW DME Reading
– Compatible with IM608 & IM508
– Read / Write Bosch engine ECU on BMW F classis
– Benz vehicles with DAS3 CAN EIS/EZS in AKL
– Read / Write Bosch engine ECU on VW MQB
– Use in vehicle or on bench

APB112
– Chip Decoding
– Compatible with XP400 for 4D transponder functions
– 46, 4D data collection
– Smart key password calculation (Hyundai/Kia 46)
– 46 chip simulation
– Toyota 4D (94/D4, 98) smart key emulation
– Toyota H (88/A8, A9, 39) smart key emulation
– Collects data from ignition coil
– Identify ignition coil troubles
– Decode vehicle key chip data
– Simulate vehicle key chip (ex – 4D chip)
– Must be used with an Autel diagnostic tool
– Toyota/Lexus smart key all key lost
– Chip decoding (Hyundai 46)
– Read / Write Bosch engine ECU on BMW F classis
– Read / Write Bosch engine ECU on VW MQB
– Compatible with IM608 & IM508
– Use with XP400 for 4D transponder functions

IM508 | IM608 | |
---|---|---|
Maintenance & Key Programming Services : | - Keys & Immobilisers all keys lost - Asian & Domestic Models - 24 Common Service Resets including the most common (Oil Reset Service, EPB, BMS, SAS, DPF) | - Keys & Immobilisers all keys lost - Asian & Domestic Models - 24 Common Service Resets including the most common (Oil Reset Service, EPB, BMS, SAS, DPF) |
Advanced Maintenance & Key Programming: | - Advanced Coding & Adaptations - Bi-directional controls - MaxiFlash JVCI/ECU programmer for modules & Keys |